Tuning pin bushings

[Clark Sprague]

So, please elaborate on your procedure, and was it you, Joe Goss, or was it Joseph Garrett? 
Clark A. Sprague, RPT
  ----- Original Message ----- 
  From: Joe And Penny Goss 
  To: Pianotech List 
  Sent: Friday, August 25, 2006 12:26 AM
  Subject: Re: Tuning pin bushings


  Hi Joe,
  You remember correctly.
  Joe Goss RPT
  Mother Goose Tools
  imatunr at srvinet.com
  www.mothergoosetools.com
    ----- Original Message ----- 
    From: Clark Sprague 
    To: pianotech at ptg.org 
    Sent: Thursday, August 24, 2006 7:50 PM
    Subject: Tuning pin bushings


    HI, ALL!      Don't I remember, awhile back, a comment someone made about soaking their tuning pin bushings before installation, to soften them up a little?  Joe Garrett, maybe?    I couldn't find it in the archives.    
    Clark A. Sprague, RPT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060825/4c74cbc3/attachment.html