Garrett Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Clark Sprague To: Pianotech List Sent: Thursday, August 24, 2006 10:54 PM Subject: Re: Tuning pin bushings So, please elaborate on your procedure, and was it you, Joe Goss, or was it Joseph Garrett? Clark A. Sprague, RPT ----- Original Message ----- From: Joe And Penny Goss To: Pianotech List Sent: Friday, August 25, 2006 12:26 AM Subject: Re: Tuning pin bushings Hi Joe, You remember correctly. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Clark Sprague To: pianotech at ptg.org Sent: Thursday, August 24, 2006 7:50 PM Subject: Tuning pin bushings HI, ALL! Don't I remember, awhile back, a comment someone made about soaking their tuning pin bushings before installation, to soften them up a little? Joe Garrett, maybe? I couldn't find it in the archives. Clark A. Sprague, RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060825/00e298e8/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC