If you are putting scratches in the keytop, does it have a tendency to attract dirt? I have customer who did something similar with 0000 steel wool and his keys are constantly dirty... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "John Ross" <jrpiano at win.eastlink.ca> To: "Pianotech List" <pianotech at ptg.org> Received: 8/31/2006 1:13:35 PM Subject: Re: Keytops ?? :-( >Hi Ron, >I used a block of polishing felt, that I got from Schaff, years ago. >I placed the 600 grit water paper on it, added some water, and turned >the key upside down, and moved the key. In no time at all, the keytop >looked similar to the ivory keytops. >I just did it on an old sample key I had made up to show. It had quite a >few scratches on it. It came up lovely. >I personally like the look better, but will give the customer the >option, as some like the shiny. >Thank you for the suggestion. I just never thought on doing it that way. >John M. Ross >Windsor, Nova Scotia, Canada. >jrpiano at win.eastlink.ca >----- Original Message ----- >From: "Ron Nossaman" <rnossaman at cox.net> >To: "Pianotech List" <pianotech at ptg.org> >Sent: Thursday, August 31, 2006 11:06 AM >Subject: Re: Keytops ?? :-( >> >>> Hi Ron, >>> When you say 'wet sand', what do you use as the wetting agent, and is >>> it a felt block you use? >>> Thank you. >>> John M. Ross >> >> 'Mornin John, >> Just a little water, and a piece of hammer felt scrap for a block. >> Before I started sanding them, I used to scrub them with a piece of >> back rail cloth and the abrasive I use on my buffing wheel for brass >> (dry, no water). I like the texture of the sanding better. >> Ron N >>
This PTG archive page provided courtesy of Moy Piano Service, LLC