Who's the owner, Gumby? Alan Barnard Salem, MO Joshua 24:15 Original message From: Farrell To: "Pianotech List" Received: 12/06/2006 6:00:17 PM Subject: Re: Kimball Spinet Question "A square rubber thingee lost motion adjuster...of course." Actually, that's precisely what I use. I got it a long time ago from one of the supply houses - it's a square socket type thing that attaches to your multi-tool handle. Look first to see if the rubber is hard and crunchy before you start turning them - otherwise you might buy the owner a set of rubber nuts. But you knew that..... ;-) Terry Farrell ----- Original Message ----- This one has square rubber thingees for adjusting lost motion. What's your tool of preference? Thanks, -Phil Bondi(Fl) A square rubber thingee lost motion adjuster...of course. anon -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061206/ddfe2a25/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC