The Soundboard bit.. was Steinways / David Andersen

[J Patrick Draine]

Don,
I do hope that someone (Ron N or O, or Del) clarifies their position
on RC v. RC & S. My understanding was that RC & S did not require the
soundboard panel (and ribs) being dried prior to glue-up to the extent
that the classical RC method calls for.
Patrick Draine

On Sat, 09 Dec 2006 07:41:20, Don <pianotuna at accesscomm.ca> wrote:

> Hi Gregor,
> RC = rib crowned (curved ribs pressed against the sound board)
> RC & S = rib crowned and supported (really the same as RC)