Ed: I don't know if you've tried to sand them a bit. That would be my first guess. The plastic is thick enough to sand quite a lot. Otherwise, why not just replace all of them? It's extremely difficult to match cream/white color. As a Young Chang dealer, our store had to replace some keytops. When I ordered the new ones, they asked what the exact model and serial was. They apparently have two different keytop shades, which to my eye look absolutely identical. Until you put them on the keys, that is. The wrong shade sticks out like a sore thumb... Add to that the fact that the keytops are shaped differently on the front edges, and some are rounded over the whole key, and it's going to be next to impossible to get a match. If it were me, I'd tell the customer that they need a new set of keytops. Anyhow, good luck Paul McCloud San Diego ----- Original Message ----- From: "ed miller" <edmiller3 at hotmail.com> To: <pianotech at ptg.org> Sent: Sunday, December 10, 2006 7:19 AM Subject: plastic keytop matching Hi, I have a client with two white keys that are burnt. How can I get a perfect match? I have samples from Shcaff and nothing is quite as deep cream as his set. What other supplier has a lot of plastic keytops to choose from? Are there any methods to save these burnt keytops without replacing the keytop? The problem is mostly discoloration, with one small spot where plastic has been melted. Thanks, Ed _________________________________________________________________ Get the latest Windows Live Messenger 8.1 Beta version. Join now. http://ideas.live.com
This PTG archive page provided courtesy of Moy Piano Service, LLC