[CAUT] Bridge pin removal

[Ron Nossaman]

>> Fred-
>> Under the circumstances you describe, you might first try tapping the 
>> pins _out_ a millimeter or so (using the pin puller) and listening to 
>> the results. That may be all you need to do to get a clean sound.
>> Ed Sutton
> 
> If you're going to get


No no no. Sorry, a miscue.

What I started to say was that as long as you're throwing 
conventional wisdom into the pit of fuzzy conviction, just 
rotate the pins anything over about 20°, to get the string on 
virgin surface without changing altitude.
Ron N