damper mechanism squeaks....argh!

piannaman at aol.com piannaman at aol.com
Thu Dec 21 21:41:51 MST 2006


I've buckskinned all of the possible offending areas.  Every stinkin one.  It happens with all the removable case parts off. 
 
Dave Stahl

Dave Stahl Piano Service
650-224-3560
dstahlpiano at sbcglobal.net
http://dstahlpiano.net/




 
 
-----Original Message-----
From: josephspiano at comcast.net
To: pianotech at ptg.org
Sent: Thu, 21 Dec 2006 10:13 AM
Subject: Re: damper mechanism squeaks....argh!


Try bracing under the bottom board and see if the squeak goes away
Joseph Alkana RPT
----- Original Message ----- 
From: Gene Nelson 
To: Pianotech List 
Sent: Thursday, December 21, 2006 9:17 AM
Subject: Re: damper mechanism squeaks....argh!


Did you put the buckskin in areas around the bottom board?
Any flex in the bottom board?
Gene
----- Original Message ----- 
From: piannaman at aol.com 
To: pianotech at ptg.org 
Sent: Thursday, December 21, 2006 7:16 AM
Subject: damper mechanism squeaks....argh!


 Hi All,
 
I thought I could solve any damper pedal mechanism squeak, and up until recently, I've had pretty good luck.  Then I met a recent model Hallet-Davis (Dongbei built, I believe) upright.  
 
I lubricated and tightened everything I could think of.  Here's the list of things I tightened and lubed:
 
Lubed
damper flange centers (protek CLP)
damper springs (teflon powder)
damper lever felt with teflon(two weeks prior) and protek last night
lift rod with protek
all rod tips and linkage w/ special blend
 
tightened 
all screws on the various rails
pedal rod hinge screws
all pedal brackets and fixture screws
all damper flange screws
all available case screws
In addition, I inserted buckskin pieces in places where case parts were rubbing and replaced the rubber pieces where the pedal rod inserts into the lift rod with buckskin pieces
 
Noise still there…..argh! It sounds to me like it's the damper lever felt/lift rod interface. It doesn't happen when the pedal is first being used, say for 20-30 presses of the pedal. Then gradually, the creak comes back.
 
I don't know what else to do. Did I miss anything?  Any ideas?
 
Dave Stahl

Dave Stahl Piano Service
650-224-3560
dstahlpiano at sbcglobal.net
http://dstahlpiano.net/






Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
________________________________________________________________________
Check out the new AOL.  Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061221/45408f7f/attachment-0001.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC