Interesting. TL has a default of 25% through but recommends changing it to 29% at the bass/tenor break, then 34% somewhere about C5, and about G6, I think, recommends tapering off to 13% at C8. Obviously there is some "flexibility" in pitch raise formulas..... Obviously since I don't have the exact locations firmly locked into the senile mind, I "fiddle" here and there, and seem to get it to work rather nicely. I also make alterations if the piano is significantly (40+ cents etc.) out of tune. les bartlett -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Farrell Sent: Saturday, December 23, 2006 5:26 AM To: Pianotech List Subject: Re: pitch raise question >I don´t know how other ETD´s work, but verituners default setting for >pitch raise overpull is 36 % in the diskant. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.26/598 - Release Date: 12/22/2006 3:22 PM
This PTG archive page provided courtesy of Moy Piano Service, LLC