---------------------- multipart/alternative attachment >Pianotech has a Balance rail hole reamer part # KCS-1B that will >do the job. Keep your finger firmly on the bottom of the BR hole and >ream until the tip of the reamer touches your finger tip. I place the reamer in a hand-cranked hand drill and use the bench surface as a stop. This tool is inserted down through the b/r bushings. Not only does it ream each key to uniform thickness at the hole, it excavates any debris from the area on top of the hole. -- Regards, Jon Page ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f4/68/00/08/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC