Thanks Terry, I'm using my floor drill press at the moment, but will be making something up for the next time...yeah, from Pianotek David Ilvedson, RPT Pacifica, CA 94044 Original message From: Farrell To: "Pianotech List" Received: 9/5/2006 11:01:48 AM Subject: Re: arbor press Drill press. Did you buy the setup for leading hammers from Pianotek? I believe it is they, or maybe in the Stanwood kit that it recommends using a small drill press. I just use my little Sears benchtop rig. Terry Farrell ----- Original Message ----- Where the heck do you find a small arbor press for lead in hammers? I'm not having any luck in my area...all 1 ton+ David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060905/c2652df1/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC