Well, that is an interesting thought...I hadn't considered it, but even if I drill all the way through I don't necessarily center the lead... David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Joseph Garrett" To: pianotech Received: 9/5/2006 7:22:53 PM Subject: Hammer weighting...Was Arbor Press David asked: "I have just tried David Love's suggestion of 1/2 through holes which gets you about .3 or .4 grams, a simple tap with hammer and lead punch...simplicity... What does the List think of 1/2 way holes rather than all the way through? 2 1/2 holes equals one through for about the same weight...." David, I should think that the 1/2 way through would put the hammer in a bit of a inertial imbalance. <G> (worth a thought, I think.) Regards, Joseph Garrett, R.P.T. Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060905/128b774f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC