Shawn, Glad you've learned that lesson! :-D At 01:36 PM 9/14/2006, you wrote: >sounds good! I am getting them out to look at a new piano >soon. But I have told them in the mean time I would see what i >could do with the one they have. As far as the loose tuning pins are concerned, if you're going to try and work on it, use CA. It usually works. But with all the loose hammer felt, I don't think I'd even do that without "fixing" the other first! Avery >The one thing I have learned about word of mouth is, if you make >someone happy they might tell one person, but if you make someone >mad they will tell everyone they know. >Shawn Brock >Cincinnati Sound Lab >130 East Sixth Street >Cincinnati Oh. >45202 >Phone: 513-349-8541 >Web Site: ><http://www.cincysoundlab.com>www.cincysoundlab.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060914/371743f2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC