/\/\ounting a heater bar

[KeyKat88 at aol.com]

Greetings,

        I went to a church the other day that had a Baldwin Hamilton Studio 
upright. It had a heater bar just (and I am not joking here)_ just thrown into 
the bottom of the piano-not mounted on anything, just loose and setting on the 
pedal trapwork!..and plugged in! I was asked to mount it.  It is not spring 
loaded so it can be fit in. 

 Can a heater bar be mounted with 2 simple sheeet metal strips about an inch 
wide,  bent into a loop and the tab of the loop screwed into the back of the 
key bed? Will metal mounting loops of any kind interfere with the heat or 
function of the thing?
What Is the best way to mount a heater bar?  

Thanks
Julia Gottshall
Rerading, PA 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060921/1bdbcaa2/attachment.html