Hi Julia, If there is no humidistat then take the drier bar "out of service". It is possible to use the latest "stand off" clips from DamppChaser to fasten the drier bar to the bottom of the key bed. Or you may become creative and manufacture something that will work. Use no flamible materials! At 04:12 PM 9/21/2006 EDT, you wrote: > Greetings, It is not spring loaded so it can be fit in. > bent into a loop and the tab of the loop screwed into the back of the key >bed? Will metal mounting loops of any kind interfere with the heat or >function of the thing? Thanks Julia Gottshall No virus found in >this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / >Virus Database: 268.12.6/453 - Release Date: 9/20/2006 Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC