Hi all, I serviced a new Bohemia 185 yesterday. There were many voicing and tuning issues, most of which were taken care of with tuning, some lifting, sand paper, a toothbrush (my new answer to a wire brish), and a small amount of needling. D#4, however, has a metallic after ring that I couldn't dispose of for any length of time. I was able to make it go away for brief periods by seating the string at the front bridge pin (pushing down, not whacking!). After about ten hammer blows, the sound would return. It seems that the string wants to return to the position from whence it came, the spot of the annoying noise. I tried to lightly tap the pin with a dowel, but to no avail. Might this be a situation where a tiny spot of CA might do the trick? I'd be most grateful for any suggestions. Dave Stahl Dave Stahl Piano Service 650-224-3560 dstahlpiano at sbcglobal.net http://dstahlpiano.net/ ________________________________________________________________________ Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060929/6ac4ef4d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC