The cyclone is from Clear Vue Cyclones. They have three models available: The orginal standard size designed to fit under an eight-foot ceiling (the one I have - 1,400 cfm), the Mini CV1400 Cyclone designed to fit under a 7-foot ceiling (1,100 cfm), and a real small one for a shop vacuum conversion. http://www.clearvuecyclones.com/index.htm The filters are the model 9L300BL 0.5 micron woodworking filter available from Wynne Environmental for $70. http://www.wynnenv.com/cartridge_filters.htm The design is based on work done by Bell Pentz - read all about it at: http://billpentz.com/woodworking/cyclone/Index.cfm Terry Farrell ----- Original Message ----- > I'm sorry I missed earlier posts, but could you indicate where you got > this beast? And also the 0.5 micron filters? > > Thanks, > Mike Wagner -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060930/19892f30/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC