Hey bondi, how much for a soundboard / belly work on a model conover 99 ? On 4/10/07, Phil Bondi <phil at philbondi.com> wrote: > > Jon Page wrote: > > >>/ Is the stud too tight to use the 'fish-tail' tool?/ > > >Yes. Unfortunately. > > > > Use a Dremel Tool with a ball tip to index a center > > and try a reverse bit. > > > Jon..others: > > I have used the reverse drill bit without resorting to the > Dremel first. An awl and some light tapping with a hammer > work well. > > -Phil Bondi(Fl) > > -- Mark J. Schultz markjschultz at gmail.com 404.502.8500
This PTG archive page provided courtesy of Moy Piano Service, LLC