broken agraffe

[Farrell]

broken agraffeOr just angle a small screwdriver on some part of the broken agraffe that will catch it and gently tap it to rotate the agraffe counterclockwise. It's amazing how often this works just fine - it is the way I most often remove them.

Terry Farrell
  ----- Original Message ----- 
  From: Jon Page 
  To: pianotech at ptg.org 
  Sent: Tuesday, April 10, 2007 11:50 AM
  Subject: broken agraffe


  >> Is the stud too tight to use the 'fish-tail' tool?
  >Yes. Unfortunately.


  Use a Dremel Tool with a ball tip to index a center
  and try a reverse bit.
-- 

  Regards,

  Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070410/f8dcf4bb/attachment.html