S&C metric agraffes

[Don A. Gilmore]

Thanks Isaac.  It's a fairly new Prelude grand and I believe it was made in Dongbei, China.  Who is your source for the Yamaha agraffes?

Don
  ----- Original Message ----- 
  From: Isaac Sadigursky 
  To: 'Pianotech List' 
  Sent: Saturday, April 14, 2007 7:44 PM
  Subject: RE: S&C metric agraffes


  Hi,Don!

  Was this  Story & Clark piano made by Yamaha in the 70-thies??? If so,use Yamaha Metric Agraffes.If you will have difficulties with Yamaha,call me.I have a few extra Yamaha agraffes..What do you need,1,2,or 3-holes????  Isaac  818-991-3672

   


------------------------------------------------------------------------------

  From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Don A. Gilmore
  Sent: Saturday, April 14, 2007 9:37 AM
  To: Pianotech
  Subject: S&C metric agraffes 

   

  Hello:

   

  I have a Story & Clark grand with a broken agraffe.  Unfortunately the shank of these agraffes has a bizarre, metric thread.  I have determined that it is an M7 x .75 and have even found a source for the tap.  But I can't find a source for the agraffes.  Most of the standard replacement agraffes you see from piano tech supply houses are either 7/32-36 UNS or 1/4-36 UNS threaded.  

   

  Could any of you direct me to where I might find these metric agraffes?  Thanks.

   

  Don
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070414/3537c17d/attachment-0001.html