S&C metric agraffes

[Isaac Sadigursky]

Hi,Don!

Was this  Story & Clark piano made by Yamaha in the 70-thies??? If so,use
Yamaha Metric Agraffes.If you will have difficulties with Yamaha,call me.I
have a few extra Yamaha agraffes..What do you need,1,2,or 3-holes????  Isaac
818-991-3672

 

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Don A. Gilmore
Sent: Saturday, April 14, 2007 9:37 AM
To: Pianotech
Subject: S&C metric agraffes 

 

Hello:

 

I have a Story & Clark grand with a broken agraffe.  Unfortunately the shank
of these agraffes has a bizarre, metric thread.  I have determined that it
is an M7 x .75 and have even found a source for the tap.  But I can't find a
source for the agraffes.  Most of the standard replacement agraffes you see
from piano tech supply houses are either 7/32-36 UNS or 1/4-36 UNS threaded.


 

Could any of you direct me to where I might find these metric agraffes?
Thanks.

 

Don

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070414/31ddf84f/attachment.html