Yamaha spring cord replacement for pianos without flanges with plates?

[Thomas Cole]

If anyone is trying to find replacement hammer flanges for Yamaha and 
Kawai uprights, Pacific Piano (818-700-2100) can now supply them (made 
by Tokiwa). They also have lots of other action parts, some of which are 
not yet shown in their catalog.

Tom Cole

piannaman at aol.com wrote:

> Does anybody have a technique for replacing hammer return spring cords 
> on pianos--mostly consoles, I would think--that have wood flanges 
> without the screw-in center pin holding plates?  Is it a better bet to 
> replace the flanges?  I would think so, but I think the time might end 
> up being a wash, and I hate to waste materials...besides, if it's a 
> grey market unit, getting parts might be a problem.
>
> Any tips or suggestions are more than welcome.
>
> Thanks
>  
> Dave Stahl
>
> Dave Stahl Piano Service
> 650-224-3560
> dstahlpiano at sbcglobal.net
> http://dstahlpiano.net/
>
>
>
> AOL now offers free email to everyone. Find out more about what's free 
> from AOL at AOL.com 
> <http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=http://www.aol.com>.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070418/35af4a46/attachment.html