Hi Mike, I think the problem Baoli has is that the shift LEVER is broken, not the pedal. Correct me if I'm wrong here, Baoli. William R. Monroe > Baoli, the same holds true for a cast iron pedal, brazing is the way to > go, except in this case some reinforcing is in order on the underside of > the pedal to strengthen it. If you can get a new one, all the better, but > if not, again a good welder should be able to make it better than new. If > you get stuck send it to me. > Mike
This PTG archive page provided courtesy of Moy Piano Service, LLC