Hi,Baoli! Contact Charles Ramsey corp in Kingston,New York..They will help you.....Welding will NOT WORK on Mason-Hamlin traps,it's too complex..good Luck.. Isaac -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Mike Kurta Sent: Tuesday, April 24, 2007 1:17 PM To: Pianotech List Subject: Re: Shift lever for Mason BB If you have the broken pieces, a good welder can restore it like new. That should be a brass pedal, and brazing would put it back together. Mike Kurta
This PTG archive page provided courtesy of Moy Piano Service, LLC