I'm thinking a poorly fitted upper action support post( the one the knob threads onto), the "U" of the action bracket was creaking past the post! On 8/16/07, ITUNEPIANO at aol.com <ITUNEPIANO at aol.com> wrote: > > First of all, determine that the squeak is above the key bed BEFORE > messing with the bottom board :) On a Yamaha, damper flange springs often > squeak , but since you don't hear it when the action is out, you must have > loose action rail screws, or a badly adjusted action support, or a loose key > bed. > > Bob Maret, RPT > Piano Technician > > > > ------------------------------ > Get a sneak peek of the all-new AOL.com<http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982> > . > -- Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070816/5859282b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC