Here is a picture showing the blade; just an ordinary Stanley cutting knife blade but make sure it's the heavy duty one. The normal blade tends to bend under pressure and breaks. The whole contraption measures 7" X 4". The lever arm came out of an old slide projector. Here's a gizmo for shaping hammers. Take one empty cotton reel, glue on sandpaper, attach to shaft of screw blade and insert into cordless screwdriver. Beware this tool is dangerous. Handle with care! AF ----- Original Message ----- From: Farrell To: Pianotech List Sent: Monday, February 05, 2007 10:17 PM Subject: Re: Tools of the Trade -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070206/80041e8b/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 23759 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070206/80041e8b/attachment-0003.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 45004 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070206/80041e8b/attachment-0004.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 15835 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070206/80041e8b/attachment-0005.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC