It can also be downloaded from the Renner website or cut and pasted from Spurlock. http://rennerusa.com/TechnicianPdfs.asp John Dutton From: Paul Chick (Earthlink) [mailto:tune4 at earthlink.net] Sent: Wednesday, 07 February, 2007 07:45 To: Pianotech at Ptg.Org Subject: Voicing revisited Someone on the list was asking for voicing information. I just ran across my copy of "Voicing the Renner Hammer" by Rick Baldassin. This isn't the last word on boicing, but is a good place to start. His techniques can be used for voicing just about any hammer. You can get a copy from Renner USA, 480-575-1700. I don't know the price. Mine came free with a set of hammers. Paul C -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070207/bb3013aa/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: Voicing_the_Renner_Hammer.pdf Type: application/pdf Size: 311227 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070207/bb3013aa/attachment-0001.pdf
This PTG archive page provided courtesy of Moy Piano Service, LLC