applying Teflon powder

[Barbara Richmond]

Hi William,

My iron has inline switch (which isn't marked).  It didn't take long for me to realize that if I took a permanent marker and made a slash on it when I got it at the right temperature I wouldn't have to test for temperature anymore.   I just make sure the slashes line up (never turn it off) and plug or unplug it to turn it on or off.  Yeah...I know how to handle technology...

Barbara Richmond, RPT

  ----- Original Message ----- 
  From: William R. Monroe 
  To: Pianotech List 
  Sent: Tuesday, February 20, 2007 11:21 PM
  Subject: Re: applying Teflon powder


  Hi Barbara,

  I Like it!  I also iron with the broaches, and have done it both ways - before and after applying the Teflon.  I think I generally prefer before as the Teflon grabs a bit better before the bushing cloth is flattened more with the iron.  I assume you use a dial temperature control?  How hot do you like to set the iron?

  Thanks for the useful tool.

  Best,
  William R. Monroe
    
    ----- Original Message ----- 
    From: Barbara Richmond 
    To: Pianotech 
    Sent: Tuesday, February 20, 2007 9:34 PM
    Subject: Re: applying Teflon powder


    Here's a picture of one of my Teflon applicators (no, it's not a Christmas light, I just found the picture in that folder).

    Barbara Richmond
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070221/032c0c7e/attachment.html