>Make a loop in the wire and give it a slight bend at the cross-over. To clarify this statement: By 'bend at the cross-over' I mean once the loop is formed, lift the loop by pressing the cross-over onto the wire. ________./<loop Half that bend is sufficient. /.----------> / splice __ /________./ wire / The loop on the splice is larger than the loop on the wire. Pass the splice loop over the wire loop and onto the wire. Insert end of splice into wire loop and pull loops together. I hope this ascii art come out. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070228/cbf7550b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC