Hey Now, Play with the blow distance, make it a little less bit by bit until you get some after touch. You could also try getting a ten mm key dip block. Of course do all that other stuff that has been advised on other post...if you haven't already. Steve Pura Vida ----- Original Message ----- From: Jeff Miller To: pianotech at ptg.org Sent: 1/7/2007 6:06:43 AM Subject: regulation problems O.k. now that I've completely typed all the wrong info on the first email, and embarrassed myself , let me try this again. The piano is a G1 Yamaha Key height is 65.5 blow distance is 47.5 key dip is 3/8 (using the Jaras key dip tool) My problem is after I get through all the regulation points the white keys are bottoming out on the black keys front rail felt. I am regulating this action on the bench, I don't' know if that changes anything. I can't think of any other details. Yes, I have spaced everything, aligned jacks in windows, etc.. I feel like its probably something real minor that I'm just overlooking. Thanks for any help. Jeff Miller -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070107/4415c8cf/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC