Patrick, if you go to our website at http://www.motspheres.com/RestorationProcess/index.html, you'll see exactly what you would have had the rebuilder do, and what the repair would entail. This was (still is, I hope) a Bechstein with much the same problems you are describing. PR-J IF YOU WANT TO KNOW THE TRUTH, STOP HAVING OPINIONS! In a message dated 01/13/07 15:19:47 Central Standard Time, jpdraine at gmail.com writes: This morning I went out to tune a Steinway A, recently purchased several months ago at a major S&S dealership's "major concert venue special sales event". While originally manufactured in 1908, It had recently been fully rebuilt (new soundboard etc.). Anyway, I found a few hairline cracks in the lid as I was tuning it, and then as I was under the piano, starting to install a Dampp-Chaser system, I noticed a crack in one of the beams, and gaps/cracks in the rim. As I was just about to put some screws to secure the fill tube in the immediate vicinity of said cracks I decided to retreat from the installation, and inform the prevously blissful customer of my findings. I really don't know what level of implied or spelled out warranty the customer may have in this situation. It's certainly possible that these gaps & cracks will be/are stable, but I prefer to be cautious rather than blindly optimistic. The customer isn't a panicky type; she's on good terms with the sales person & I helped her compose an e-mail to the sales person informing the dealer of the situation. It seems to me an EZ but entirely stable repair would be for the dealer to take it back to the shop, flip the piano over, and fill the rim & beam cracks with low viscosity epoxy. I suppose a low viscosity glue can fix the cracks in the lid, too, followed by a couple more coats of ebony lacquer. Question to the rebuilder/remanufacturers/dealers out there: wouldn't you address these issues even if you're selling it as a used (at said concert & teaching complex) rebuilt piano? Put another way, am I being too "sensitive" in expecting some effort in filling the gaps in the rim in a structurally sound manner? Patrick Draine -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070114/13e8377b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC