Good. That's what I was told. Now, how does one orient hammers in it? Dave ----- Original Message ---- From: Mark Dierauf <pianotech at nhpianos.com> To: pianotech at ptg.org Sent: Saturday, January 20, 2007 4:18:20 PM Subject: Re: Brooks Jig It's a hammer boring jig. - Mark > ubject: > Brooks Jig > From: > Dave Davis <dave at davispiano.com> > Date: > Sat, 20 Jan 2007 07:53:29 -0800 (PST) > To: > Pianotech <pianotech at ptg.org> > > To: > Pianotech <pianotech at ptg.org> > > > I picked this up at a chapter tool swap. I'm the third owner and it's > never been used. It kills me to flaunt my ignorance, but what is it, > and how does it work? > > Anyone? > > Dave Davis, RPT > > > > > ------------------------------------------------------------------------ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Pianotech list info https://www.moypiano.com/resources/#archives -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070120/784638ae/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC