Jon, Okay, now I get it. I had the orientation wrong, thinking the base mounted onto the drill press table. Thanks for the pics. Thanks, Dave Davis ----- Original Message ---- From: Jon Page <jonpage at comcast.net> To: pianotech at ptg.org Sent: Saturday, January 20, 2007 5:20:06 PM Subject: Brooks Jig I use Wally's jig but replace the rear support because it was too flexible. I mounted it on a larger piece of plywood and put a knob on the rear to easily change the angle. The main body rotates for rake and the center strip adjusts the angle up or down for pitch. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070120/951380d0/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC