That is the idea. I'll skip the rest of the editorializing. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Richard Brekne Sent: Friday, June 22, 2007 2:18 PM To: pianotech at ptg.org Subject: Rep Lever friction was RE: Keep on filing...(picture attached) .Of course if you want to keep the hammer speed the same after repinning you need to adjust tension.... RicB If you want the same speed of hammer rise you certainly do. David Love It is not given that you need to change the tension of the spring whenyou change pinning resistance. RicB -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070622/75fe0c93/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC