Dave, congrats, and thanks for all your contributions! Richard ----- Original Message ---- From: "piannaman at aol.com" <piannaman at aol.com> To: pianotech at ptg.org Sent: Wednesday, March 14, 2007 9:21:47 AM Subject: Re: new string broke after 3 months You could shoeshine it off with some medium grit then fine grit paper. That should work. Dave Stahl, RPT Dave Stahl Piano Service 650-224-3560 dstahlpiano at sbcglobal.net http://dstahlpiano.net/ -----Original Message----- From: rsanbornmorgan at yahoo.com To: pianotech at ptg.org Sent: Wed, 14 Mar 2007 7:06 AM Subject: new string broke after 3 months In December I replaced a wound string on an execrable Yamaha electric piano (definitely a PS/POS). That string broke on Sunday, and I've ordered a replacement. Checking the underside of the v-bar that terminates the speaking length, where the string broke, I found a slight burr in the metal. What can I do about that, in case that is what caused the string to break? Thanks in advance, Richard Morgan AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070314/56fb3ced/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC