The Beauty of the Open-Faced Pinblock

[Jon Page]

>This is my latest little attempt to get those beckets lined up.

Nice tool but it looks a little cumbersome to use.  The two following 
links have photos of
gages which secure the wire in place. Also notice the indexing 
markings for tool placement,
wire in the treble needs to have the tool index from the center of 
the hole where as you
get lower in the scale the indexing migrates towards the rear of the 
hole.  This maintains
the becket alignment through the scale.  Also simpler to make.

https://www.moypiano.com/ptg/pianotech.php/attachments/20070524/dacdaf17/attachment-0001.obj

https://www.moypiano.com/ptg/pianotech.php/attachments/20070524/bfe720eb/attachment-0005.jpe
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070524/bc8d65a6/attachment.html