JD - thanks for the information on recreating dampers for vintage pianos. Do you have a special trick for cutting the damper felt on an angle? I find it hard enough to cut cut it nice and vertical! :^) Jurgen Goering Piano Forte Supply (250) 754-2440 info at pianofortesupply.com http://www.pianofortesupply.com On May 24, 2007, at 4:34, JD wrote: > I cut the felt strip at an angle /__\ so that when the under side (top > side on the Erard!) is pressed in the sides will be vertical -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 703 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070528/c745b20e/attachment.bin
This PTG archive page provided courtesy of Moy Piano Service, LLC