Jon, And once I ascertain the profile is there somewhere you can point me so I know which is which? Greg -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Friday, November 16, 2007 5:07 PM To: pianotech at ptg.org Subject: Steinway action noise An easy way to ascertain the manufacturer of the parts is to look at the profile of the molding contour on the flanges. Each manufacturer has a different profile. Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC