Terry, I thought that's what he meant but I'd never heard that term before so I was unsure. I'll take it on faith that you're correct. This sounds like a lot of work as mentioned in his post. Just moving in all that lumber seems like "there's got to be a better way". Greg At 05:04 AM 9/2/2007, you wrote: >I think he means the technique by which one >jacks a large object up at three or four points >maybe four inches or so at a time and shoves a >4x4 timber in place after each jacking session. > >I have used this method several times over the >years to jack a 6,000 lb. sailboat up about >three to four feet off the ground so that I >could back a trailer under it and its cradle. >Cradle is supported at four points. Jack one >corner up four inches with a little hydraulic >car jack (or really any jack you can get under >there), shove a 4x4 under it, take jack out. >Move on to next corner. Repeat. Repeat this >procedure about 50+ times and you are there! I >have done this completely unassisted. > >However, I'm not sure how this method would work >jacking something up to a second story! Hmmmmmm, >don't think so. Maybe he was thinking of something else......... > >Terry Farrell > >----- Original Message ----- >> This is interesting. What do you mean >> by cribbing? I've not heard that term before. >> I suppose I could continue to add height to a >> platform being built underneath the piano as >> we go. Sounds like a lot of work though. > Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) 2003,04,05 & 06 winners of Angie's List Super Service Award
This PTG archive page provided courtesy of Moy Piano Service, LLC