Hi... I'm afraid the work you ask for will exceed the value of the Bauer in Cost effectiveness of the project and the final outcome. My first recommendation is..."Don't. RJ ----- Original Message ----- From: Michael Magness<mailto:IFixPianos at yahoo.com> To: Pianotech List<mailto:pianotech at ptg.org> Sent: Tuesday, April 08, 2008 2:25 PM Subject: Juluis Bauer Grand We have acquired a Julius Bauer 5'5" grand in need of restringing, including block, full action work, keybushings and keytops and refinishing. My limited research shows the value of a rebuilt, refinished Bauer to be quite a differing spread. I found a 4'10" for $13,000 in Tennesee and a 5'5" "with new strings" for $2700 in New York. I decided I would check with the real experts, any thoughts? Mike -- The greatest challenge to any thinker is stating the problem in a way that will allow a solution. - Bertrand Russell Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com<http://www.ifixpianos.com/> email mike at ifixpianos.com<mailto:mike at ifixpianos.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080408/c0177150/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC