Palm Nailers (again)

[AlliedPianoCraft]

Diane, please read my post on making a punch to use with the palm nailer. You will never leave a mark on the tuning pin and you can see the depth of tuning pin while hammering.

Al Guecia
  ----- Original Message ----- 
  From: Diane Hofstetter 
  To: pianotech at ptg.org 
  Sent: Saturday, April 19, 2008 1:07 PM
  Subject: Palm Nailers (again)





  >Palm Nailers (again)
  >Delwin D Fandrich fandrich at pianobuilders.com|



  >I have a shelf full of jigs and fixtures I've made over the years. Many of them
  >I have no idea what I made them to do.

  >Del


  Embarrased to say I have several boxes of my jigs, lovingly packed for the move to Portland, still in their boxes four years later... Maybe some convention some day should include an exhibit room dedicated to all our home made jigs (used and unused).

  However, I recently restrung a Chickering grand for a friend. He had bought some German tuning pins with a real pretty blued coating. Unfortunately, my impact hammer tip did nick them some, so I had to restring the whole piano with a two=pound sledge again.  First time in YEARS.  It was pure torture! And took MUCH longer.

  Diane Hofstetter

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080419/bc730937/attachment.html