Matthew, >From your wording below, you may have missed the meaning of birds-eye? The birds-eye is not the hole itself, but the raised mound around the hole that gives clearance. So, bushed parts, such as the flange in your example would not have a Birdseye, only the unbushed parts. Scott Jackson Mt Keira, NSW, Australia. -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Matthew Todd Sent: Friday, 15 August 2008 11:07 To: Pianotech List Subject: Re: Center Pin This may be exactly what I need Jon. My problem has been getting the flange birdseye in line with the jack birdseye. I was working on a Yamaha today with plastic jacks, so I don't know if it is more difficult than the wood ones. Matthew -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080817/bfc67be5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC