Here's another use for those dummy credit cards for spacing flat treble dampers with the action on the bench. The photo if a out of focus but you can get the idea. These dampers were way off base but this method works for even finer adjustments. I cut a notch out of the card back from the edge the width of a unison. Place the left edge of the template on the string impression and then bend the wire to position the felt under the template. -- Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: damper spacing.jpg Type: application/octet-stream Size: 62365 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080822/6974b4c7/attachment-0001.obj
This PTG archive page provided courtesy of Moy Piano Service, LLC