That's the way I would do it.? Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Matthew Todd <toddpianoworks at att.net> To: pianotech at ptg.org Sent: Wed, 3 Dec 2008 11:20 am Subject: [pianotech] Fractured Keystick Hello list, ? I need to repair a fractured keystick on a clients piano.? There is a fracture on both sides in the area below the button.? The front of the button has come unglued as a result.? My fix was going to be try to get as much wood glue in the fracture and under the key button as possible, then get a thin?piece of veneer and glue on each side of the keystick, clamp and dry.? Then sand the sides to fit once installed back in the piano. ? Yes or no? TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081203/57b9b426/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC