[pianotech] (no subject)

John Formsma formsma at gmail.com
Sat Dec 13 19:14:09 PST 2008


Check the bass dampers.  One is probably not doing it's job.
-- 
JF

On Sat, Dec 13, 2008 at 8:18 PM, Caitriona Ireland
<catrionna2001 at yahoo.com>wrote:

> Hi All;
>
> Having a ringing problem with 1909/10 production run of a Connway Co.
> Boston upright when playing F2, that is same as F23 counting bass A as A1,
> the ringing occurs in the sporano section of the piano near the middle
> section of the soprano. I have muted all of the soprano with felt and mutes
> but still their is ringing, hmm, don't know the solution to this, have
> checked string by tuning pins to see if they touch/rub together, have
> checked seating of string coils on tuning pins.
>
> Would love some ideas with this, anyone out their in all this sudden cold
> weather, 10 below her Western Montana.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081213/0f68d849/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC