Real thick, it's a Polyester creak. A thin strip of masking tape on the bottom of the kick board will cure it. and some felt glued to the metal retaining clip just under the keyboard. That has to worth 2 beers. Regards Roger At 06:15 PM 12/16/2008, you wrote: >Hi all. > >Actually, it's not the pedal, but the structure itself. > >The culprit is a Yamaha P121. The 'noise' happens only when the kick panel >is in place. > >I'm hoping, among the vastness that is pianotech, an answer to this >perplexing problem exists for this client. > >Did I lay it on thick enough?!? > >Thanks, > >-Phil Bondi(Fl) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081217/b3cb43cf/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC