Hi Ryan, I just did a set and it did not cost me anything except for the time in my shop. I did it the Spurlock way. I used what I had in my shop, a piece of metal for the jig with a couple of centre pins soldered in for markers and some maple for inserts. Jack -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081220/d0f28679/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: balance hole repair 001 (2).jpg Type: image/jpeg Size: 52669 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081220/d0f28679/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC