[pianotech] Fw: Emailing: balance hole repair

[David Love]

That works too.  One thing I wonder is what is the optimum thickness for the
insert at the balance point?  

 

David Love

www.davidlovepianos.com

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jack Houweling
Sent: Saturday, December 20, 2008 6:22 PM
To: Pianotech List
Subject: [pianotech] Fw: Emailing: balance hole repair

 

Hi Ryan,

 

I just did a set and it did not cost me anything except for the time in my
shop. I did it the Spurlock way.

I used what I had in my shop, a piece of metal for the jig with a couple of
centre pins soldered in for markers

and some maple for inserts.

 

Jack  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081220/0833c049/attachment.html>