Gene Nelson wrote: > Just one more thing - when making this sort of conversion I am looking > at options on how to best dampen the contact point between metal capstan > and wood lift lever. > I am planning on a slight relief cut into the lever and gluing in a > piece of woven action felt. > Any ideas would be appreciated. > Gene I just felt the under lever. The thin capstan head and rabbet in the tray allow plenty of room to work without having to cut anything from the under lever. Ron N -------------- next part -------------- A non-text attachment was scrubbed... Name: damper capstan.jpg Type: image/jpeg Size: 44175 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081225/b11e157d/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC