Thanks Jon. I always wondered how folks get such a good clean look. Now I know! Much appreciated. Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Thursday, January 03, 2008 12:20 AM To: pianotech at ptg.org Subject: Balance Rail Bushings What do you use to get such a good, clean cut at the top when you're finished? Razor blade or what? A razor blade cut through the veneer and cloth against the brass caul. For the bushing on the left, that was a Bushmaster install. I cut from the center out with a razor blade once the cauls are removed and then sand the buttons with a palm sander and 180 grit paper. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080103/2da895cd/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC